
APCI-8001PCI motion control board for three servo or stepper axes
Position control is carried out by the board and not by the computer: a 64-bit RISC processor runs the PID filter with feed-forward compensation and can execute several user programs in parallel.
The incremental encoder inputs accept differential or TTL signals and the reference outputs towards the drives are 16-bit over ±10 V. Sixteen digital inputs and eight digital outputs at 24 V, isolated at 1000 V, complete the link towards limit switches and enables.
At a glance
- Memory: RAM 32 MB
- Channels: 3
- DAC resolution: 16
- Analog output range: ±10 V
- Isolation voltage: 1000 V (opto)
Technical specifications
| Memory | RAM 32 MB |
|---|
| Digital I/O | 16× isolated DI (24 V) + 8× isolated DO (24 V, 500 mA) |
|---|---|
| Connectors | N-pin connectorD-Sub |
| Channels | 3 |
|---|---|
| Counter | 0 and 4294967295 |
| DAC resolution | 16 |
| Analog output range | ±10 V |
| Acquisition specifications | basic frequency of 20 kHz and a resolution of 3500 steps plus signRS422 step/direction outputs per channel, pulses up to 2.5 MHz (opt. 10 MHz)Encoder inputs: incremental diff./TTL up to 2.5 MHz (10 MHz after quadrupling); SSI up to 32 bit, Gray/binary, 30 kHz-10 MHz(misc)Servo setpoint outputs: 1 per channel, D/A 16 bit, ±10 V, isolated(logic levels) |
| Isolation | Yes |
| Isolation voltage | 1000 V (opto) |
| Board function | Motion control |
|---|---|
| Architecture standard | PCI |
| Bus interface | 1 PCI slot (board); OPMF slave: 1 slot; FB8000 cable: 1 openingcan be optionally fitted with a CanBus interface |
| Supply voltage | 5 V DC |
|---|
| Dimensions | 175 × 106 mm |
|---|
| Operating temperature | 0–60 °C |
|---|
| Driver & SDK | 32-Bit-Windows (Windows NT, 2000, XP, Vista und Windows 7) |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.









