
APCI-7300-3Single-port PCI serial board with galvanic isolation
The operating mode is not fixed on the board: RS232, RS422, RS485 and 20 mA current loop are obtained by fitting the matching MX module, which also brings the galvanic separation with it.
Speed is programmable up to 115.2 kBaud, with a crystal option reaching 1 MBaud, and a 128-byte FIFO buffer per transmitter and receiver lowers the load on the processor. Declared isolation is 1000 V.
At a glance
- Memory: FIFO buffer 128 bytes per port (TX/RX)
- Channels: 1
- Isolation voltage: 1000 V (MX modules)
- Board function: Serial
- Architecture standard: PCI
Technical specifications
| Memory | FIFO buffer 128 bytes per port (TX/RX) |
|---|
| Connectors | D-Sub(male · front) |
|---|---|
| Serial interfaces | 1× RS-232/422/485/20 mA CL (configurable via MX modules, up to 115.2 kBaud; 1 MBaud with quartz option) |
| Channels | 1 |
|---|---|
| Acquisition specifications | Protection: short circuit (RS422/RS485), fast transients (burst), ESD, EMI3.2 mm (isolated MX modules)(creepage)UART 16C950, backward compatible(misc) |
| Isolation | Yes |
| Isolation voltage | 1000 V (MX modules) |
| Board function | Serial |
|---|---|
| Architecture standard | PCI |
| Bus interface | 1 slot PCIPCI 32 bit, 3,3/5 V (spec. 2.2 PCI-SIG)(3.3 V / 5 V) |
| Supply voltage | 5 V DC |
|---|---|
| Power consumption | 0.8 W(+ 5 V) |
| Dimensions | 151 × 99 mm |
|---|---|
| Weight | 0.12 kg |
| Operating temperature | 0–60 °C |
|---|---|
| Storage temperature | -25–70 °C |
| Operating systems | LinuxWindows |
|---|---|
| Driver & SDK | https://addi-data.com/drivers |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.









