Industrial PCs with PICMG1.3 Backplane [PCIe/PCI]
GO-289-IPC132U industrial PC, 696 mm deep, with six 3.5″ hot-swap drive trays
- Manufacturer
GO-289 is a 2U chassis on a PICMG 1.3 passive backplane, intended for 19″ rack cabinets: frame in pre-galvanized steel, 483 × 88 × 696 mm.
Expansion reaches six boards and the front carries six 3.5″ hot-swap drive trays, one 5.25″ drive and two USB behind a cover panel; the LEDs signal power, drives and network and warn with an audible alarm on fan failure or temperature, and every unit goes through climatic burn-in and leaves with its acceptance Test Report. GOMA configures it for the application.
At a glance
- Storage: 1 x 5.25”, 1 x FDD slim, 6 x cassetto Hot Swap 3.5” | 1 x 2.5” HDD interni
- Architecture standard: PICMG 1.3
- Number of slots: 6
- Mounting: Rack Mount
- Cooling: Fan (active)
Technical specifications
| Storage | 1 x 5.25”, 1 x FDD slim, 6 x cassetto Hot Swap 3.5” | 1 x 2.5” HDD interni |
|---|
| Other I/O | Fronte: Pannello frontale di chiusura 2 x USB · Retro: Alloggiamento per 6 bracket full height |
|---|
| Architecture standard | PICMG 1.3 |
|---|---|
| Number of slots | 6 |
| Rack units | 2 |
|---|---|
| Dimensions | Chassis 2U - 483 x 88 x 696 mm |
| Mounting | Rack Mount |
| Chassis material | Acciaio pre-zincato |
| Chassis color | Nero, beige o altri colori su richiesta |
| Front panel buttons | Power On/Off e System Reset |
| Cooling | Fan (active) |
|---|
| Humidity | 10–95 |
|---|---|
| Storage temperature | -20–70 |
| Operating temperature | 0~50 |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Compatible boards
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.