PCI-8134A4-axis motion control board for the PCI bus
- Manufacturer
- Configurations
- 1 available configurations
PCI-8134A is a four-axis motion controller for computers with a PCI bus, used to drive stepper drivers and servo drives with pulse input in positioning machines.
The encoder counter works at 28 bits and the inputs and outputs dedicated to the servo are differential and optically isolated at 2500 VRMS. The firmware provides linear interpolation on two axes and trapezoidal and S-curve velocity profiles.
At a glance
- Channels: 4 channel
- Isolation voltage: 2500 VRMS V
- Board function: Motion control
- Architecture standard: PCI
Technical specifications
| Channels | 4 channel |
|---|---|
| Counter | 28-bit up/down counter for incremental encoder |
| Acquisition specifications | Uscita impulsi 0,01 pps – 2,4 Mpps programmabile; ingresso encoder 2,4 MHz(misc)Start/stop simultaneo su pin STA/STP(logic levels)Risoluzione di velocità 16 bit(resolution) |
| Isolation | Yes |
| Isolation voltage | 2500 VRMS V |
| Board function | Motion control |
|---|---|
| Architecture standard | PCI |
| Bus interface | 32-bit PCI bus, Rev. 2.2, 33 MHz |
| Operating systems | WindowsLinux |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Family configurations
The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.
| Configuration (PN) |
|---|
| PCI-8134A-2M |
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.