LEC-BASE 2.0SMARC 2.0 carrier board for development and evaluation, with MXM3 connector
- Manufacturer
LEC-BASE 2.0 is an ADLINK carrier board compliant with SMARC 2.0. You mount the module on it and verify its interfaces on the bench before designing your custom carrier. It is a platform for development and evaluation, not a board to integrate into the finished product.
What sets it apart is the video side. For the panel, you choose between dual-channel LVDS or eDP. As a configurable output you have HDMI or DP++, plus a dedicated DP++. This way you evaluate the module with the type of display you will use in the field, not with the one the carrier imposes on you.
At a glance
- MXM3 connector for the SMARC module
- Two Gigabit Ethernet ports
- 305 x 170 mm form factor
Technical specifications
| Video outputs | Supports dual channel LVDS or eDP, HDMI or DP++, DP++ |
|---|
| Ethernet ports | Dual GbE |
|---|---|
| Connectors | SMARCR 2.0 compliant carrier board with MXM3 connector |
| Architecture standard | SMARC |
|---|---|
| Board function | CarrierDevelopment/evaluation |
| Expansion | Compatible with both short and full size SMARCR 2.0 modules · Connector for MIPI CSI camera add-on card |
|---|
| Dimensions | 305 mm x 170 mm |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.