APCIe-1711-5V-IPCI Express analog and digital I/O board with 5 V inputs
- Manufacturer
APCIe-1711-5V-I is an analog and digital I/O board for a PCI Express slot, meant for reading encoders and position signals on an industrial PC. The board measures 168 × 98 mm and uses a front 78-pin D-Sub connector.
Beside the differential channels, 28 non-isolated TTL lines are available. Power comes from the bus at 3.3 V and separation towards the field side is 1000 V.
At a glance
- Channels: 4 channel
- Isolation voltage: 1000 V (optoisolatori)
- Board function: Analog and digital I/O
- Architecture standard: PCI Express
- Power input: DC V
Technical specifications
| Digital I/O | 16× I/O RS422 + 12× DI 5 V + 4× DO 24 V high-side (90 mA); 28× TTL I/O non isolati |
|---|---|
| Connectors | D-Sub(male)D-Sub(female · front) |
| Channels | 4 channel |
|---|---|
| Counter | 4 moduli funzione programmabili; encoder incrementale 1× 32 bit o 2× 16 bit; ingressi E, F, G a 5 V |
| Acquisition specifications | Ingressi differenziali: sensibilità 200 mV, isteresi 50 mV, impedenza 12 kΩ(misc)Uscite 24 V high-side (carico a massa), 90 mA/uscita (270 mA totali, PTC)(output)0-7 V(range)Ingressi E, F, G a 5 V (al posto di 24 V)(logic levels) |
| Isolation | Yes(opto) |
| Isolation voltage | 1000 V (optoisolatori) |
| Board function | Analog and digital I/O |
|---|---|
| Architecture standard | PCI Express |
| Bus interface | 1-/4-/8-/16-lane PCI Express slotAcc. to PCI Express base specification, Revision 1.0a (PCI Express 1.0a) |
| Power input | DC V |
|---|
| Dimensions | 168 × 98 mm |
|---|
| Operating temperature | 0–60 °C |
|---|
| Certifications | IEC 61010-1 |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.