MicroTCA Blades & Modules (MTCA.0)
AMC599AMC FPGA module with serial access on micro USB
- Manufacturer
AMC599 is a programmable logic AMC board for MicroTCA shelves, where it carries out local processing on the streams passing through the backplane.
Stated draw runs from 45 to 60 W according to the load put into the FPGA, a figure to weigh in the power budget of the shelf. The service connections are brought to the front panel through two micro USB sockets, which expose the serial consoles of the manager and of the application. The board states the AMC.1, AMC.2 and AMC.4 profiles, CE, FCC and UL certifications and a storage range from -40 to 85 °C.
At a glance
- FPGA / processing: Xilinx UltraScale™ XCKU115 FPGA
- Memory: 0 = 512 Mb; 1 = 1 Gb GB
- RAM type: DDR4
- Board function: FPGA
- Architecture standard: AMC.1
Technical specifications
| FPGA / processing | Xilinx UltraScale™ XCKU115 FPGA |
|---|
| Memory | 0 = 512 Mb; 1 = 1 Gb GB2× banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB |
|---|---|
| RAM type | DDR4 |
| Ethernet ports | Dual GbE and 10/40GbE |
|---|---|
| Other I/O | x2 Micro USB for MGT RS-232 and CPU RS-232 |
| Board function | FPGA |
|---|---|
| Architecture standard | AMC.1AMC.2AMC.4AMC |
| Form factor | Single full-size |
| Bus interface | x11 SMPMDual x4 via FPGA to AMC |
| IPMI management | 2.0 |
| Hot-swap | sì(ejector-handle) |
| Power consumption | 45–60 W |
|---|
| Dimensions | 73.5 × 180.6 mm |
|---|
| Storage temperature | -40–85 °C |
|---|
| Certifications | ULFCCCE |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.