ADLINK USB-2405 con quattro connettori BNC e logo ADLINK sul corpo grigio

PCI & PCIe I/O Boards

USB-240524-bit USB data acquisition module with programmable trigger

Manufacturer

USB-2405 is a 24-bit data acquisition module linked over USB, used to measure analog signals on the bench and in the field, without taking a slot of the PC.

Sampling frequency is settable in software across the whole stated interval. Trigger handling covers the post, pre and middle modes, with delay, gate and re-trigger, so that the interval of interest is isolated even when the event precedes the trip condition.

The family comes in 2- or 4-channel versions; the USB-2405/S configuration is also in the catalog.

At a glance

  • Channels: 4 channel
  • ADC resolution: 24-bit bit
  • Sampling rate: 1–128 kSps
  • Analog input range: ±10 V
  • Simultaneous sampling: Yes

Technical specifications

Digital I/O2× programmable GPIO (3.3 V/TTL, single-ended)
ConnectorsBNC

Channels4 channel
CounterEvent counter / pulse output up to 4 MHz
ADC resolution24-bit bit
Sampling rate1–128 kSps
Analog input range±10 V
Input impedance200 kΩ between positive input and negative input; 16.93 kΩ between negative input and chassis ground ohm(in gnd)200 kΩ between positive input and negative input; 16.93 kΩ between negative input and chassis ground ohm(in diff)
Input couplingAC(software)DC(software)
Simultaneous samplingYes
Trigger modesDelay-triggerGatedMiddle-triggerPost-triggerPre-triggerRetriggerExternal analog trigger(software)External digital trigger(software)
Acquisition specificationsAccuratezza DC (25 °C): offset ±0,15 mV tip. (±0,3 mV max), gain ±0,15% tip. (±0,3% max)(accuracy)ADC Delta-Sigma 24 bit with integrated anti-aliasing filter; differential or pseudo-differential input(resolution)Eccitazione IEPE 2 mA software-selezionabile (compliance 24 V)(misc)I/O digitali 3,3 V/TTL (single-ended)(logic levels)Digital inputs: VIL ≤0.8 V, VIH ≥2.0 V (0.2 mA max)(range)
I/O protectionOvervoltage(±60V)

Board functionAnalog and digital I/O
Architecture standardUSB
Bus interfaceHi-Speed USB 2.0, USB bus poweredProgrammed I/O, continuous (bulk transfer mode)

Power consumption5 V @ 400 mA (USB bus powered) = 2 W

Dimensions114 × 167.5 × 41.3 mm

Operating temperature0–55 °C
Storage temperature-20–70 °C

Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.

Family configurations

The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.

Configuration (PN)
USB-2405/S
GOMA's Turin headquarters at dusk: the red canopy over the entrance, the glazed façade and the GOMA ELETTRONICA sign

Let's talk about your project

Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.

Subscribe to our newsletter

New references in the catalogue, qualifications obtained and trade show dates. One email a month, no spam.