
USB-240124-bit USB DAQ module for universal inputs
USB-2401 is a universal data acquisition module linked over USB, used in thermal testing and in measurements with passive sensors, where each channel can be configured for a different kind of signal.
The inputs accept voltage, current, thermocouples, RTDs, resistive bridges and resistance, with simultaneous sampling on the four differential channels and a maximum frequency of 2 kS/s. The module is powered from the USB bus and wiring lands on two pluggable 20-pin terminal blocks.
At a glance
- Channels: 4 channel
- ADC resolution: 24-bit bit
- Sampling rate: 2 kS/s max (selectable data rate 20–2000 S/s) kSps
- Analog input range: ±2.5 V
- Simultaneous sampling: Yes
Technical specifications
| Digital I/O | 4× DI + 2× DO (5 V/TTL) |
|---|
| Channels | 4 channel |
|---|---|
| Counter | 1× 32 bit (base clock 80 MHz, external up to 10 MHz) |
| ADC resolution | 24-bit bit |
| Sampling rate | 2 kS/s max (selectable data rate 20–2000 S/s) kSps |
| Analog input range | ±2.5 V |
| Input impedance | 1.009MΩ for voltage input mode; 249.5Ω for current input mode ohm |
| Input coupling | DC |
| Simultaneous sampling | Yes |
| Acquisition specifications | Input protection (power on): 30 V voltage mode; 60 mA current mode; 30 V with sensor-mode disabled; no protection with sensor-mode enabled or between EX+ and AGND± 0.5°C (after 15 minute warmup)(accuracy)Data rate selectable: 20, 40, 80, 160, 320, 500, 1000, 2000 S/s(sample rate)Digital inputs: VIL ≤0.8 V, VIH ≥2.0 V (0.2 mA max)(range)Universal measurement: voltage ±25 / ±12.5 / ±2.5 V / ±312.5 mV; current ±20 mA; thermocouples K, J, N, R, S, B, T, E; RTD Pt100/Pt1000 (3/4 wire); half/full bridge (120/350 Ω); resistance 2 wire 25 kΩ(misc)TTL (single-end) (supports 3.3V and 5 V DI but 3.3V DO)(logic levels) |
| Board function | Analog and digital I/O |
|---|---|
| Architecture standard | USB |
| Bus interface | Programmed I/O, continuous (USB bulk transfer mode)USB 2.0 High-Speed |
| Supply voltage | USB bus powered |
|---|---|
| Power consumption | 5 V @ 400 mA (USB powered) = 2 W |
| Dimensions | 41 × 114 × 156.5 mm |
|---|
| Operating temperature | 0–55 °C |
|---|---|
| Storage temperature | -20–70 °C |
| Operating systems | LinuxWindows |
|---|---|
| Driver & SDK | LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.









