MicroTCA Blades & Modules (MTCA.0)
AMC516AMC FPGA carrier for FMC with Virtex-7 and optional CPU
- Manufacturer
AMC516 is a carrier for FMC boards to VITA 57 built on a Xilinx Virtex-7 690T FPGA, with two banks of DDR3 and AMC ports 12 through 20 routed towards the programmable logic.
As an option it can fit a quad core QorIQ P2040 CPU at 1.2 GHz with boot flash and SD card, so as to load the firmware on its own. The carrier draws about 20 W without a mezzanine and storage temperature runs from -40 to 85 °C; software support covers Linux, VxWorks and Windows.
At a glance
- Memory: 0 = None; 1 = Reserved; 2 = 2 GB + 128 MB
- RAM type: DDR3
- Board function: FPGA
- Architecture standard: AMC.1
- Form factor: Single mid-size
Technical specifications
| Memory | 0 = None; 1 = Reserved; 2 = 2 GB + 128 MB2× banks of DDR3 (64-bit and 16-bit) |
|---|---|
| RAM type | DDR3 |
| Ethernet ports | Dual 10 GbE via FPGA and Dual 1000-BaseBX from PPC |
|---|
| Board function | FPGA |
|---|---|
| Architecture standard | AMC.1AMC.2AMC.4AMC |
| Form factor | Single mid-size |
| Bus interface | Front panel FMC, MGT RS-232, CPU RS-232Dual x4 via FPGA to AMC |
| IPMI management | 2.0 |
| Hot-swap | sì(ejector-handle) |
| Power consumption | 20 W |
|---|
| Dimensions | 73.5 × 180.6 mm |
|---|
| Storage temperature | -40–85 °C |
|---|
| Certifications | CEULFCC |
|---|
| Operating systems | LinuxWindowsVxWorks |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.