MicroTCA Blades & Modules (MTCA.0)
AMC512Full-size AMC FPGA carrier with FMC slot and Virtex-5
- Manufacturer
AMC512 is a carrier for FMC boards built around a Xilinx Virtex-5 FPGA, with two banks of 32-bit DDR2 for a total of 512 MB meant for processing the mezzanine data.
The protocol towards the backplane is decided by the firmware, with AMC.1, AMC.2 and AMC.4 conformance, while the front panel exposes the FMC and two separate serials for management and for the FPGA. The carrier draws about 20 W without a mezzanine and storage temperature runs from -40 to 85 °C.
At a glance
- Memory: Up to 512 MB GB
- RAM type: DDR2
- Board function: FPGA
- Architecture standard: AMC.1
- Form factor: Single full-size
Technical specifications
| Memory | Up to 512 MB GBdual bank of DDR2 memory (32-bit wide) for a total of 512MB GB |
|---|---|
| RAM type | DDR2 |
| Board function | FPGA |
|---|---|
| Architecture standard | AMC.1AMC.2AMC.4AMC |
| Form factor | Single full-size |
| Bus interface | x4 (if the x8 PCIe is not used)x4 or x8Front panel FMC, IPMI RS-232, FPGA RS-232 |
| IPMI management | 2.0 |
| Hot-swap | sì(ejector-handle) |
| Power consumption | 20 W |
|---|
| Rugged / conformal coating | Humiseal 1A33 Polyurethane (Optional); Humiseal 1B31 Acrylic (Optional)(Humiseal 1A33/1B31) |
|---|---|
| Dimensions | 73.5 × 180.6 mm |
| Storage temperature | -40–85 °C |
|---|
| Certifications | ULFCCCE |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.