INJ-102GT++Two-port Gigabit PoE++ injector, 90 W per port
- Manufacturer
INJ-102GT++ adds PoE power to two already cabled Ethernet runs, when the installed switch does not power the ports and redoing the cabling is not practical. The IP-30 chassis mounts on DIN rail or wall.
The DC input is 50~57 VDC on a four-pole terminal block. LTPoE++ technology takes the output up to 90 W per port: that power is available only with LTPoE++ units, while with an IEEE 802.3at or 802.3af device it stays at the standard figure. The operating range runs from -20 to 70 °C.
At a glance
- PoE power budget: 90 W
- Copper port speed: 10/100/1000 Gigabit
- Power input: 50–57 V
- Mounting: Wall Mount
- Operating temperature: -20–70 °C
Technical specifications
| Device type | PoE injector |
|---|
| Copper ports (RJ45/M12) | 2 |
|---|---|
| PoE power budget | 90 W |
| PoE | IEEE 802.3af/at (LTPoE++) |
| Copper port speed | 10/100/1000 Gigabit |
|---|---|
| Ethernet ports (in/out) | 2× ingresso dati (RJ-45) + 2× uscita dati e PoE (RJ-45) |
| Power input | 50–57 V |
|---|
| Mounting | Wall MountDIN Rail Mount |
|---|---|
| Dimensions | 26.1 × 95 × 70 mm |
| Weight | 0.3 kg |
| IP rating | IP30 |
|---|---|
| Operating temperature | -20–70 °C |
| Storage temperature | -40–80 °C |
| MTBF | 2947356 h |
| Manufacturer warranty | 5 year |
| Electrical safety | EN 60950-1 |
|---|---|
| EMC (emission/immunity) | IEC 61000-4-4 EFTIEC 61000-4-5 SurgeIEC 61000-4-6 CSIEC 61000-4-8 PFMFEN 55024EN 55032CISPR 32FCC Part 15BIEC 61000-4-2 ESDIEC 61000-4-3 RS |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.