INJ-102GT-24VPoE+ injector with dual 12~57 VDC input
- Manufacturer
INJ-102GT-24V powers PoE units from a data run already in place, with a dual DC input from 12 to 57 VDC on a terminal block.
Power follows the applied voltage: 30 W between 12 and 24 VDC and 60 W between 24 and 57 VDC, with a maximum of 30 W per port. The -40 to 75 °C operating range, the IP30 enclosure and DIN-rail or wall mounting complete the installation profile, together with reverse-polarity protection.
At a glance
- PoE power budget: 30–60 W
- Copper port speed: 10/100/1000 Gigabit
- Power input: 12–57 V
- Redundant input: Yes
- Power consumption: 1 W
Technical specifications
| Device type | PoE injector |
|---|
| Copper ports (RJ45/M12) | 2 |
|---|---|
| PoE power budget | 30–60 W |
| PoE | IEEE 802.3af/at |
| Copper port speed | 10/100/1000 Gigabit |
|---|---|
| Ethernet ports (in/out) | 2× ingresso dati (RJ-45) + 2× uscita dati e PoE (RJ-45) |
| Power input | 12–57 V |
|---|---|
| Redundant input | Yes |
| Power consumption | 1 W |
| Mounting | DIN Rail MountWall Mount |
|---|---|
| Dimensions | 41 × 95 × 70 mm |
| Weight | 0.37 kg |
| IP rating | IP30 |
|---|---|
| Operating temperature | -40–75 °C |
| Storage temperature | -40–85 °C |
| MTBF | 3165390 h |
| Electrical safety | EN 60950-1UL 61010-1UL 61010-2-201 |
|---|---|
| EMC (emission/immunity) | EN 55024EN 55032FCC Part 15BCISPR 32 |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.