INJ-101GT++-60W-24VGigabit PoE++ injector with extended 9~57 VDC input
- Manufacturer
INJ-101GT++-60W-24V powers a remote PoE unit over the same copper run that carries the data, with an extended DC input from 9 to 57 VDC that adapts to the supplies already present in the cabinet.
Available power follows the applied voltage: 30 W between 9 and 24 VDC and 60 W between 24 and 57 VDC. A DIP switch sets the mode of the PoE source, while protections against short circuit and overload act on the output.
At a glance
- PoE power budget: 30–60 W
- Copper port speed: 10/100/1000 Gigabit
- Supply voltage: 9–57 V DC
- Power consumption: 1 W
- Mounting: DIN Rail Mount
Technical specifications
| Device type | PoE injector |
|---|
| Copper ports (RJ45/M12) | 1 |
|---|---|
| PoE power budget | 30–60 W |
| PoE | IEEE 802.3af/at |
| Copper port speed | 10/100/1000 Gigabit |
|---|---|
| Ethernet ports (in/out) | 1× data input (RJ-45) + 1× data output and PoE (RJ-45) |
| Supply voltage | 9–57 V DC |
|---|---|
| Power consumption | 1 W |
| Mounting | DIN Rail MountWall Mount |
|---|---|
| Weight | 0.188 kg |
| IP rating | IP30 |
|---|---|
| Operating temperature | -40–75 °C |
| Storage temperature | -40–85 °C |
| MTBF | 2067004 h |
| Electrical safety | EN 60950-1 |
|---|---|
| EMC (emission/immunity) | CISPR 32EN 55024EN 55032FCC Part 15BIEC 61000-4-2 ESDIEC 61000-4-3 RSIEC 61000-4-4 EFTIEC 61000-4-5 SurgeIEC 61000-4-6 CSIEC 61000-4-8 PFMF |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.