IMRAK 103219″ floor-standing rack cabinet with IP32 protection and Aluzinc uprights

Manufacturer

IMRAK 1032 is the floor-standing cabinet for environments where dust is an issue but a watertight seal is not required: IP32 protection closes the cabinet without sacrificing ventilation.

The frame consists of two steel frame assemblies and two steel covers, with a maximum static load capacity of 750 Kg uniformly distributed. The 19″ uprights, in Aluzinc to optimize grounding, are fixed with brackets and allow a 90 mm adjustment, extendable to the full depth with optional side crossbars. The doors have multipoint locking with a tilting handle and reversible opening.

Request information Full specifications ↓

Technical data

Features

Frame structure consisting of 2 frame assemblies and 2 covers (top / bottom)
Static load capacity up to 750 Kg uniformly distributed
Full front 19" rack uprights compliant with IEC60297 (rear uprights optional)
Front 19" side reducers (800 mm wide rack) for vertical cable management, cable pass-through slots and provision for mounting cable management accessories
IP32-protected top cover with provision for a "zero U" fan unit with 2 or 4 fans
Front glass door with metal frame, removable metal rear door
Easily removable side panels with captive screw closure
Protected bottom with pass-through area
Height-adjustable feet
Optional wheels with 80 Kg or 115 Kg load capacity
Provision for mounting a complete grounding set in compliance with EN 60950

Finishes

Standard colours. Other RAL finishes on request from our engineering team.

RAL 7035Light grey

Technical specifications

Rack units	37 U47 U42 U27 U

Dimensions	L 600 / 800 mm · P 600 / 800 mm
Chassis material	acciaio

Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.

Configurations

How this series can be ordered: the versions built so far, each with what sets it apart.

IMRAK® 1032 PRIMARY
Versione standard – 600 mm · Porta in vetro
IMRAK® 1032 PRIMARY
Versione standard – 800 mm · Porta in vetro
IMRAK® 1032
Versione configurata · Porta in metallo
IMRAK® 1032
Versione configurata · Zoccolo ventilato

Documentation

DatasheetPDF · 261 KB

Cabinet part numbers

The sizes in this series: same cabinet, different height, depth and door. Sorted by rack units, then by code.

Part number	Description	Rack units	Dimensions
VT807-606027	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	27 U	600 x 600 mm (L x P)
VT807-608027	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	27 U	600 x 800 mm (L x P)
VT807-806027	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	27 U	800 x 600 mm (L x P)
VT807-808027	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	27 U	800 x 800 mm (L x P)
VT810-606027	Description not available yet	27 U	600 x 600 mm (L x P)
VT810-608027	Description not available yet	27 U	600 x 800 mm (L x P)
VT810-806027	Description not available yet	27 U	800 x 600 mm (L x P)
VT810-808027	Description not available yet	27 U	800 x 800 mm (L x P)
VT807-606037	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	37 U	600 x 600 mm (L x P)
VT807-608037	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	37 U	600 x 800 mm (L x P)
VT807-806037	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	37 U	800 x 600 mm (L x P)
VT807-808037	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	37 U	800 x 800 mm (L x P)
VT810-606037	Description not available yet	37 U	600 x 600 mm (L x P)
VT810-608037	Description not available yet	37 U	600 x 800 mm (L x P)
VT810-806037	Description not available yet	37 U	800 x 600 mm (L x P)
VT810-808037	Description not available yet	37 U	800 x 800 mm (L x P)
VT807-606042	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	42 U	600 x 600 mm (L x P)
VT807-608042	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	42 U	600 x 800 mm (L x P)
VT807-806042	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	42 U	800 x 600 mm (L x P)
VT807-808042	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	42 U	800 x 800 mm (L x P)
VT810-606042	Description not available yet	42 U	600 x 600 mm (L x P)
VT810-608042	Description not available yet	42 U	600 x 800 mm (L x P)
VT810-806042	Description not available yet	42 U	800 x 600 mm (L x P)
VT810-808042	Description not available yet	42 U	800 x 800 mm (L x P)
VT807-606047	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	47 U	600 x 600 mm (L x P)
VT807-608047	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	47 U	600 x 800 mm (L x P)
VT807-806047	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	47 U	800 x 600 mm (L x P)
VT807-808047	IMRAK® 1032 primary cabinet, glass front door and metal rear door (assembled)	47 U	800 x 800 mm (L x P)
VT810-606047	Description not available yet	47 U	600 x 600 mm (L x P)
VT810-608047	Description not available yet	47 U	600 x 800 mm (L x P)
VT810-806047	Description not available yet	47 U	800 x 600 mm (L x P)
VT810-808047	Description not available yet	47 U	800 x 800 mm (L x P)
VT808-201261	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201263	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201264	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201265	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201267	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201269	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201270	IMRAK® 1032 primary cabinet, glass front door	—	—
VT808-201271	IMRAK® 1032 primary cabinet, glass front door	—	—

Accessories

The codes that fit this series. An accessory can be compatible with several series: it appears under each of them. Sorted by code.

Photo	Part number	Description
	003-200-00002	APW catalog item in the 19″ Rack Cabinets category
	003-200-00003	APW item in the 19″ Rack Cabinets category, with derived configurations
	003-200-00004	19″ Aluminum rack socket strip, 9 UNEL BIPASSO outlets, 16A, 2 m cable, Schuko plug
	C12ALMST-MT2S	APW catalog item in the 19″ Rack Cabinets category
	C16ALMST-IL2S	APW item in the 19″ Rack Cabinets category, with two configurations
	VA385-775228	Unit identification strips from 1U to 48U
	VA385-776542	Reverse unit identification strip from 48U to 1U
	VA802-562180	Power cable 1.5 m unterminated with Schuko plug
	VA803-561559	Power cable 2 m unterminated with BS1363/A 13A plug
	VK385-775653	Kit of 4 leveling feet
	VK385-775721	Kit of 2 casters with brake – 80 Kg static load
	VK385-775722	Kit of 2 casters without brake – 80 Kg static load
	VK385-775843	Thermostat and wiring kit
	VK385-776190	M6 wing nuts kit, 50 pcs
	VK385-776191	M6×12 mm screws and washers kit, 50 pcs
	VK385-776232	Plastic single ring kit for cable support (10 pcs)
	VK385-776250	2-caster kit with brake, 115 Kg static load
	VK385-776251	2-caster kit without brake, 115 Kg static load
	VT390-787964	Pull-out drawer kit, 19″ 2U, RAL 7035
	VT555-500515	Copper ground bar kit, 1U 19″, with insulators
	VT567-565489	Lifting eyebolt kit
	VT593-599469	Blue cable entry slot trim kit, 125 mm (10 pcs)
	VT593-599470	Cable support kit, 125 mm (10 pcs)
	VT802-510011	Catalog item in the APW range for 19″ rack cabinets
	VT802-510014	APW reference for fitting out 19″ rack cabinets
	VT802-510026	Item in the APW range dedicated to 19″ rack cabinets
	VT802-510027	APW component for fitting out the 19″ rack
	VT802-552914	Heavy-duty shelves 19″ 600 x 472 mm RAL 7035
	VT802-552915	Heavy-duty shelves 19″ 600 x 627 mm RAL 7035
	VT802-552916	Heavy-duty shelves 19″ 600 x 754 mm RAL 7035
	VT802-552917	Heavy-duty shelves 800 x 472 mm RAL 7035
	VT802-552918	Heavy-duty shelves 800 x 627 mm RAL 7035
	VT802-552919	Heavy-duty shelves 800 x 754 mm RAL 7035
	VT802-552929	Ground bar, 13U, for cabinets
	VT802-552930	Ground bar, 27U, for cabinets
	VT802-552931	Ground bar, 39U, for cabinets
	VT802-553081	A4 document holder
	VT802-556088	Distribution bar kit for cabinets
	VT802-560005	Ground kit – type 1 – supplied unassembled
	VT802-561009	FIXED RAILS 270 MM (MIN. CABINET DEPTH 400 MM) RAL 7035
	VT802-561010	FIXED RAILS 470 MM (MIN. CABINET DEPTH 600 MM) RAL 7035
	VT802-561011	FIXED RAILS 670 MM (MIN. CABINET DEPTH 800 MM) RAL 7035
	VT802-561013	Support shelves 19″ (600 mm) x 256 mm RAL 7035
	VT802-561014	Support shelves 19″ (600 mm) x 356 mm RAL 7035
	VT802-561015	Support shelves 19″ (600 mm) x 456 mm RAL 7035
	VT802-561016	Support shelves 19″ (600 mm) x 556 mm RAL 7035
	VT802-561017	Support shelves 19″ max width 800 x 256 mm RAL 7035
	VT802-561018	Support shelves 19″ max width 800 x 356 mm RAL 7035
	VT802-561019	Support shelves 19″ max width 800 x 456 mm RAL 7035
	VT802-561020	Support shelves 19″ max width 800 x 556 mm RAL 7035
	VT802-561556	Kit of 4 casters for server – 115 Kg static load
	VT802-561561	FIXED RAILS 370 MM (MIN. CABINET DEPTH 500 MM) RAL 7035
	VT802-561562	FIXED RAILS 570 MM (MIN. CABINET DEPTH 700 MM) RAL 7035
	VT802-562284	Cantilever shelves 19″ x 255 mm RAL 7035
	VT802-562285	Cantilever shelves 19″ x 400 mm RAL 7035
	VT802-563522	1U cable management panel
	VT802-563523	2U cable management panel
	VT802-563613	Double metal cable support rings kit (10 pcs), RAL 7035
	VT802-563707	1U brush panel
	VT802-783201	Solid panel kit 1U 19″, RAL 7035
	VT802-783202	Solid panel kit 2U 19″, RAL 7035
	VT802-783203	Solid panel kit 3U 19″, RAL 7035
	VT802-783204	Solid panel kit 4U 19″, RAL 7035
	VT802-783205	Solid panel kit 5U 19″, RAL 7035
	VT802-3635758	Pull-out cantilever shelf 19″ x 400 mm for keyboard, RAL 7035
	VT808-201231	27U coupling kit
	VT808-201233	37U coupling kit
	VT808-201234	42U coupling kit
	VT808-201235	47U coupling kit
	VT808-201236	Cross member kit 2 × 600 mm
	VT808-201237	Cross member kit 2 × 800 mm
	VT808-201241	Metal cable duct kit 27U (180 mm L)
	VT808-201243	Metal cable duct kit 37U (180 mm L)
	VT808-201244	Metal cable duct kit 42U (180 mm L)
	VT808-201245	Metal cable duct kit 47U (180 mm L)
	VT808-201246	1U panel kit with plastic hooks
	VT808-201272	Plinth kit 100 mm, 600 × 600
	VT808-201273	Plinth kit 100 mm, 600 × 800
	VT808-201276	Plinth kit 100 mm, 800 × 600
	VT808-201277	Vented plinth kit 100 mm, 800 × 800
	VT808-201280	Fan unit with 2 fans (half width)
	VT808-201281	Fan unit with 4 fans (full width)
	VT808-201282	Low-noise fan unit 2 fans (half width)
	VT808-201283	Low-noise fan unit 4 fans (full width)
	VT808-201284	Cable entry brush kit
	VT808-201285	Partial cover kit, solid
	VT808-201286	Partial cover kit, vented
	VT808-201288	19″ uprights kit 27U
	VT808-201290	19″ uprights kit 37U
	VT808-201291	19″ uprights kit 42U
	VT808-201292	19″ uprights kit 47U
	VT808-201294	Kit of 2 × 19″ uprights + reducer 27U (L 800 mm)
	VT808-201296	Kit of 2 × 19″ uprights + reducer 37U (L 800 mm)
	VT808-201297	Kit of 2 × 19″ uprights + reducer 42U (L 800 mm)
	VT808-201298	Kit of 2 × 19″ uprights + reducer 47U (L 800 mm)
	VT808-201299	Adjustable shelf (550 mm to 740 mm)
	VT808-201449	Vented plinth kit 100 mm, 600 × 600
	VT808-201450	Vented plinth kit 100 mm, 600 × 800
	VT808-201451	Vented plinth kit 100 mm, 800 × 600
	VT808-201452	Plinth kit 100 mm, 800 × 800
	VT960-236702	Cable management panel 2U
	VT961-553948	19″ cable holder, RAL 7035