Scheda elettronica Acromag APZU con chip Zynq al centro, slot per scheda di memoria a destra, microinterruttori a sinistra e contatti dorati sul bordo del connettore

Mezzanine Modules

APZUAcroPack FPGA module on PCI Express with AMD Zynq UltraScale+ MPSoC

Manufacturer

AcroPack is the rugged version of a mini PCIe card: a downward-facing connector routes the I/O signals through the carrier card to the field connectors, not over flying cables. APZU is designed for COTS applications such as adaptive filtering, sensor fusion, motor control and image processing.

The distinguishing point is integration: programmable logic and processing system coexist in a single device, not in a two-chip ASSP-FPGA solution. Peripherals can be added in the logic, and functions can be partitioned between hardware and software with custom accelerators. The Engineering Design Kit for AMD Vivado provides an example design with host access to the digital I/O, serving as a starting point for your own firmware.

Available configurations: APZU-301 with 28 TTL I/O (1.8V), APZU-303 with 20 TTL and 3 RS485/422 (3.3V), APZU-304 with 14 LVDS.

At a glance

  • 154k UltraScale+ logic cells
  • 2 Gbyte LPDDR4 memory
  • Vibration designed to IEC 60068-2-6
  • VxWorks, Linux and Windows support
  • Boot from 16 GB industrial microSD

Technical specifications

FPGA / processingUltraScale+ 154k programmable logic cells
ProcessorDual-core ARM Cortex A53-based application unit (APU)Dual-core ARM Cortex R5-based real-time unit (RPU)NEON™ media-processing engine

MemoryLPDDR (2 Gbyte - 512Mbit x 32)

Storage16 GB industrial MLC microSD card pre-programmed with boot.bin file

Connectors68 pin field I/O (to carrier card)
Serial interfacesSilicon Labs CP2103GM
Ethernet portsSupports 1000BASE-T, 100BASE-TX, and 10BASE-T. · 10/100/1000Gigabit Ethernet interface
Other I/O20 channels of interrupts configurable for high-to-low, low-to-high, and change-of-state event typesGigabit Ethernet, USB 2.0 transceiver and USB-UART interfaces are supported

Digital I/OTTL, LVDS, or RS422/485 I/O interface

Architecture standardAcroPackPCI Express
Board functionFPGA
Bus interfaceConforms to PCI Express Base Specification, Rev. 2.11M Byte: BAR0 to Zynq DMA registers2.5 Gbps signaling rate32K Byte: BAR1 to programmable logic register space64K Byte: BAR2 to DDR memory spaceDMA transfersPCI Express interfacePCIe bus 1-lane (x1) Gen 1 interfacePCIe Bus Interface

Supply voltage5.0V DC (±5%): 183 mA typical, 230 mA max. · +12V DC (±5%): 165 mA typical, 200 mA max.

Dimensions70× 30 x 12.5 mm · Board thickness: 1.0 mm
Weight0.035 kg

Operating temperature-40–70 °C-40–80 °C
Storage temperature-55–125 °C

Operating systemsLinuxVxWorksWindows

Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.

Family configurations

The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.

Configuration (PN)
APZU-301
APZU-301-QSP
APZU-303
APZU-303-QSP
APZU-304
APZU-304-QSP
GOMA's Turin headquarters at dusk: the red canopy over the entrance, the glazed façade and the GOMA ELETTRONICA sign

Let's talk about your project

Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.

Subscribe to our newsletter

New references in the catalogue, qualifications obtained and trade show dates. One email a month, no spam.