AP560AAcroPack fieldbus module with 4 isolated CAN channels, ARINC 825 and CANaerospace
- Manufacturer
- Configurations
- 1 available configurations
AP560A is an AcroPack CAN bus communication module for avionics and aerospace, military vehicles and marine control and navigation systems. The AcroPack format brings Industry Pack functions to a PCIe interface in 70 x 30 mm. It mounts only on AcroPack carriers.
Each channel has a dedicated Holt H13111 controller with an ADM3053 transceiver, not a shared controller: transmission, reception and filtering remain independent per channel. Isolation applies channel-to-channel and channel-to-host. Filtering acts on the ID and the first two data bytes, for both Standard and Extended identifiers.
The family is available in the AP560E-ISO-LF configuration. APSW-API software packages for Linux, Windows and VxWorks are available as an option.
At a glance
- CAN 2.0A/B up to 1 Mbit/s
- ISO 11898-5 compliant
- 8 maskable identifier filters
- Monitor mode (Listen-only)
- 16-bit counter for time tagging
Technical specifications
| Connectors | A down facing 100 pin Samtec connector will mate with the carrier card. |
|---|---|
| Other I/O | Filtering on ID and first two data bytes for both Standard and Extended Identifiers8 maskable identifier filtersFifty of these signals are available as field I/O signalsRe-transmission disable capability |
| Channels | 4 |
|---|---|
| Isolation | Four isolated CAN channels |
| Isolation voltage | 1000 V |
| Isolation & signal | CAN 2.0A/B protocol with programmable bit rate up to 1Mbit/sec. ISO 11898-5 compliantCANaerospaceConfigurable to support ARINC 825 and CAN aerospace StandardsMonitor (Listen-only) modeStandard, Extended and Remote frames supported |
| Counter | Internal 16-bit free running counter for time tagging of transmitted or received messages |
| Architecture standard | AcroPack |
|---|---|
| Board function | Fieldbus |
| Dimensions | 70 x 30 mm |
|---|
| Certifications | RoHS |
|---|
| Operating systems | Linux(optional)VxWorks(optional)Windows(optional) |
|---|
| Controller or bridge type | Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Family configurations
The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.
| Configuration (PN) |
|---|
| AP560AE-ISO-LF |
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.