MicroTCA Blades & Modules (MTCA.0)
AMC713PrAMC with NXP QorIQ processor and 10GbE output on SFP+
- Manufacturer
AMC713 is an AdvancedMC processor module built around the single core NXP QorIQ P5010 or dual core P5020 CPUs, for AdvancedTCA and MicroTCA shelves that have to host compute capability onboard.
The DDR3 memory with ECC reaches 16 GB and sits beside NOR, NAND and SPI flash. The front panel carries a GbE port on RJ-45, a 10GbE port on SFP+ and two RS-232 serials on micro USB; the second generation PCIe link is configurable as host or as agent.
At a glance
- Processor: NXP QorIQ P5010 (single core) or P5020 (dual core) processors
- Memory: Up to16 GB DDR3 with ECC
- RAM type: DDR3
- ECC support: Yes
- Maximum RAM: 16 GB
Technical specifications
| Processor | NXP QorIQ P5010 (single core) or P5020 (dual core) processors |
|---|
| Memory | Up to16 GB DDR3 with ECC256 MB NAND flash GB |
|---|---|
| RAM type | DDR3 |
| ECC support | Yes |
| Maximum RAM | 16 GB |
| Ethernet ports | 10GbE with SFP+ interfaceDual GbE per AMC.2 on Ports 0-1 |
|---|
| Board function | CPU / Processor |
|---|---|
| Architecture standard | AMC.2AMCAMC.1 |
| Form factor | Single mid-size |
| Bus interface | Single GbE via RJ45 (air-cooled only); 10GbE via SFP+; x2 RS-232 for CPU and IPMI via Micro USBDual x4 Gen2 |
| IPMI management | 2.0 |
| Hot-swap | sì(ejector-handle) |
| Power consumption | 26 W |
|---|
| Dimensions | 73.5 × 180.6 mm |
|---|
| Storage temperature | -40–90 °C |
|---|
| Certifications | FCCULCE |
|---|
| Operating systems | WindowsLinux |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.