miniBASE-10RCOM Express Type 10 reference carrier board, Mini-ITX form factor

Manufacturer

miniBASE-10R is the ADLINK reference carrier board for COM Express Type 10 Computer-on-Modules in Mini form factor: a bench for bring-up, evaluation and software development before the custom carrier exists. The core module interface follows PICMG COM Express Revision 2.1, on a 150 × 142 mm footprint.

What sets it apart is diagnostics during the debug phase: the onboard POST LEDs read the BIOS POST code and address on the LPC bus, while power management extends to the battery, with a 10-pin header for Smart Battery communication towards the ADLINK BattMan board.

At a glance

Supports ADLINK Type 10 modules, excluding nano-TC/TCR
Compliant with COM Express Carrier Design Guide 2.0
Two Mini PCIe slots, one mSATA compatible
DisplayPort and LVDS, optional eDP
Onboard socket for secondary SPI BIOS

Request information Full specifications ↓

Technical specifications

Storage	1x SATA connector

Video outputs	Supports DisplayPort and LVDS (eDP optional) · 1× onboard header · 3.3 or 5VDC

Ethernet ports	2x LAN supports, 10/100/1000BASE-T compatible RJ-45 on I/O panel
Serial interfaces	2x DB-9 on I/O panel
Audio	Line-in, Line-out, Mic-in on DB-Audio2 daughter board (optional)Mic/Line-in/Line-out on I/O panelRealtek ALC262 on DB-Audio2 daughter board (optional)
USB ports	1x USB client2x USB 3.0 on I/O panel2x USB 2.0

Architecture standard	COM Express Type 10
Board function	Carrier
Form factor	Mini-ITX
Bus interface	I2C / SMBusup to one Mini PCIe card, one Mini PCIe/mSATA card slot and one SD card