I-Pi SMARC PlusSMARC 2.1 carrier board for ARM and x86 module development and evaluation
- Manufacturer
I-Pi SMARC Plus is the carrier board with which ADLINK brings a SMARC 2.1 module to the bench: you power the module, cable its interfaces and check its behaviour in evaluation or while designing a custom carrier.
The board covers ARM and x86 modules with the same mechanics: the X variant uses a different I²C address for the GPIO expander and is reserved for x86 modules. The qualification level is that of an industrial board, not a desktop kit: shock and vibration according to IEC 60068-2-64, IEC 60068-2-27 and MIL-STD-202 F, plus HALT tests for thermal stress, vibration stress and thermal shock.
Available with four part numbers: 91-77A07-0020 (ARM modules, without audio board), 91-77A07-5010 (x86 modules, without audio board), 91-77A07-3010 (ARM with I²S TI TLV320 audio add-on) and 91-77A07-4010 (x86 with Realtek ALC888 audio add-on).
At a glance
- M.2 E-Key and B-Key expansion slots
- 40-pin MRAA compliant signal header
- Rugged temperature −40~85 °C optional
- Interchangeable audio codec connector
Technical specifications
| Storage | 1× SDIO (4-bit) compatible with SD/SDIO standard, up to version 3.0 |
|---|
| Video outputs | 1x HDMI 1.4b / 2.0b - 1x MIPI-DSI 4 lanes - 1x eDP 1.3 (bom option) |
|---|
| Ethernet ports | 2x 10/100/1000 RJ45 connector |
|---|---|
| CAN bus | 2× CAN 2 interface pin headers |
| Serial interfaces | 4× UART interfaces SER2 (TX/X/CTS/RTS) and SER0, SER1, SER3 (TX/RX) |
| Digital I/O | 17× GPIO with interrupt on pin header |
| Other I/O | 1x microSD, 1× SIM card slot · 2x RJ45, 1x microSD, 1x SIM |
| Audio | Interchangeable audio codec connector with I2S and HDA signals1× I²S interface to audio interface |
| USB ports | 1x USB 2.0 OTG connectors2x USB 2.02x USB 3.0 |
| Architecture standard | SMARC |
|---|---|
| Board function | CarrierDevelopment/evaluation |
| Bus interface | M.2 E-Key and M.2 B-Key expansion slots |
| Expansion | 40-pin RPI MRAA compliant expansion header · M.2 E-Key and M.2 B-Key expansion slots |
|---|
| Dimensions | 110 × 110 mm |
|---|
| Operating temperature | -40–85 °C(optional)0–60 °C(optional) |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.