MicroTCA Blades & Modules (MTCA.4)
AMC725AMC processor module with Intel Xeon E3 and DDR3 ECC memory
- Manufacturer
AMC725 is a processor module in AMC form factor, compliant with AMC.0 and MTCA.4 in double module mid-size mechanics, intended as a compute node inside a MicroTCA chassis.
The processor is an Intel Xeon E3 with PCH, declared in the 2.0 and 2.5 GHz options, alongside DDR3 memory with ECC. DVI graphics reaches 1920x1440 and the front panel carries dual GbE on RJ-45, dual 10GbE on SFP+, USB and RS-232; PCIe, SATA and USB run towards the RTM.
At a glance
- Processor: Intel® Xeon E3 processor options with PCH
- Memory: 0 = Reserved; 1 = 8 GB; 2 = 16 GB
- RAM type: DDR3
- ECC support: Yes
- Board function: CPU / Processor
Technical specifications
| Processor | Intel® Xeon E3 processor options with PCH |
|---|
| Memory | 0 = Reserved; 1 = 8 GB; 2 = 16 GB16 GB of DDR3 memory with ECC |
|---|---|
| RAM type | DDR3 |
| ECC support | Yes |
| Board function | CPU / Processor |
|---|---|
| Architecture standard | AMCAMC.1AMC.2MTCA.4 |
| Form factor | Double mid-size |
| Bus interface | Dual x4 or single x8 as PCIe |
| IPMI management | 2.0 |
| Hot-swap | sì(ejector-handle) |
| Power consumption | 45 W |
|---|
| Dimensions | 148.5 × 180.6 mm |
|---|
| Storage temperature | -40–85 °C |
|---|
| Certifications | ULFCCCE |
|---|
| Operating systems | WindowsLinuxVxWorks |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Documentation
In the same category
Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.