
ACEX4041Mini-ITX PCI Express carrier for COM Express Type 10 Apollo Lake and AcroPack modules
- Configurations
- 1 available configurations
The ACEX4041 combines a COM Express Type 10 Mini CPU module (55 × 84 mm) with a mix of I/O modules for custom computing applications: analog and digital I/O, serial communication, CANbus, FPGA processing. The Mini-ITX form factor mounts in a variety of enclosures. Field I/O is routed to four 68-pin CHAMP connectors. It is designed for systems with SWaP-C constraints.
The 9-port, 12-lane PCIe Gen 2 switch expands the x4 host port into six independent x1 ports, one for each AcroPack site and one for each Intel i210 Ethernet controller. Each module has its own lane, not a shared bus. For this reason, the CPU module must have its four PCIe lanes configured as an x4 port.
Configurations: ACEX4041-2000 is available with a COM Express Type 10 Intel Atom E3950 quad-core CPU module and 4 GB of RAM.
At a glance
- Two isolated I/O slots
- ATX or 10–36 V power with auto-switch
- Xilinx JTAG header for AcroPack FPGA
- Conformal coating on request
- POST codes on 2-digit LED
Technical specifications
| CPU generation | Apollo Lake |
|---|---|
| Processor | The COM Express site supports high-performanceIntel® Atom™ E3950 quad-core(optional) |
| FPGA / processing | FPGA signal processing |
| Storage | SATA: Data and power connectors for use of a Solid-State Disk Drive. Supports SATA III devices, speeds up to 6Gb/s. |
|---|
| Video outputs | Mini DisplayPort for high-resolution graphics |
|---|
| Ethernet ports | Two Intel i210 Gigabit Ethernet Controllers. Two RJ-45 ports supporting 10/100/1000BASE-T |
|---|---|
| CAN bus | CANbus communication |
| Serial interfaces | Two ports with standard UART (RX/TX) RS-232 signal levels |
| Digital I/O | Digital I/O and counter/timers |
| Connectors | Four field I/O 68-pin CHAMP |
| Other I/O | 14-pin Xilinx JTAG header for programming and debugging FPGA AcroPack modules |
| Audio | Realtek HD Audio CODEC with line in / line out |
| USB ports | Two USB 3.0 ports with speeds up to 5Gb/s |
| Architecture standard | COM Express Type 10PCI Express |
|---|---|
| Board function | Carrier |
| Form factor | Mini-ITX |
| Bus interface | 9-port 12-lane PCIe Gen 2 switch expands the single host PCIe x4 port to 6 independent x1 ports (one for each AcroPack site and one for each Ethernet controller) |
| Expansion | 4× slots for plug-in I/O modules. Two isolated slots. Field I/O routed to 68-pin VHDCI connectors.Four I/O expansion slots (AcroPack or MiniPCIe) |
|---|
| Supply voltage | 10–36 V |
|---|
| Dimensions | 170 × 170mm |
|---|---|
| Weight | 0.1899 kg |
| Rugged / conformal coating | Conformal coating available on request |
| Operating temperature | -40–85 °C |
|---|---|
| Storage temperature | -55–125 °C |
| Certifications | CE |
|---|
| Operating systems | LinuxVxWorksWindows |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Family configurations
The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.
| Configuration (PN) |
|---|
| ACEX4041-2000 |
Documentation
In the same category

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.





