
IGS-C1050Unmanaged 5x GbE Ethernet switch with IEC 61000-4 EMC immunity
- Configurations
- 1 available configurations
IGS-C1050 is an unmanaged Ethernet switch with 5 Gigabit RJ45 ports for connecting devices in industrial networks, with no configuration required. The store-and-forward mode and a 2048-address MAC table handle traffic forwarding.
On electromagnetic immunity it covers the full IEC 61000-4 series (ESD, RS, EFT, Surge, CS, PFMF) as well as EN 55032/55035 and FCC Part 15B, with electrical safety to EN 62368-1. The power supply includes overload/overcurrent and reverse-polarity protection.
At a glance
- Management: Unmanaged
- Copper port speed: 10/100/1000 Gigabit
- MAC table: 2048 address
- Mounting: DIN Rail Mount
- Operating temperature: -40–75 °C
Technical specifications
| Copper ports (RJ45/M12) | 5 |
|---|
| Management | Unmanaged |
|---|---|
| Copper port speed | 10/100/1000 Gigabit |
| Ethernet standards | IEEE 802.3 |
| Forwarding mode | Store-and-forward |
| MAC table | 2048 address |
| Mounting | DIN Rail Mount |
|---|---|
| Dimensions | 26 × 3 × 4 mm |
| Operating temperature | -40–75 °C |
|---|---|
| IP rating | IP40 |
| Storage temperature | -40–85 °C |
| Manufacturer warranty | 5 year |
| EMC (emission/immunity) | CISPR 32EN 55032FCC Part 15BEN 55035IEC 61000-4-2 ESDIEC 61000-4-3 RSIEC 61000-4-4 EFTIEC 61000-4-5 SurgeIEC 61000-4-6 CSIEC 61000-4-8 PFMF |
|---|---|
| Electrical safety | EN 62368-1 |
| End of life (EOL) | 17/06/2026 |
|---|
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Family configurations
The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.
| Configuration (PN) |
|---|
| IGS-C1050-L |
Documentation
In the same family
More products from the same series: select up to 3 and compare them side by side.
In the same category

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.












