
TQMC603VITA 93 QMC digital I/O module with 20 galvanically isolated outputs
- Configurations
- 2 available configurations
The TQMC603 is a single-width QMC mezzanine module compliant with VITA 93.0, measuring 26 mm x 78.25 mm, connected to the host via PCIe Revision 2.1 x1. It mounts on a QMC carrier where isolated digital outputs are needed for control and automation in industrial and military embedded systems.
Each output is software-configurable as a high-side switch, low-side switch or push-pull driver: one module instead of three different boards. Isolation works on two levels, galvanic towards the system and in groups of four between the outputs, so different load domains can be separated on the same board.
Available configurations: TQMC603-10R-A, air cooled, and TQMC603-10R-H, conduction cooled.
At a glance
- Up to 0.3 A per output
- Output supply 5–36 V
- Outputs protected up to 65 V
- Update rate up to 4 µs
- Fault status readable for each output
Technical specifications
| Digital I/O | 20 Isolated Digital Outputs (5-36 V, 0.3 A) |
|---|---|
| Isolation | Galvanic isolation to system |
| Isolation & signal | Isolated to each other in groups of four |
| I/O protection | Short circuitReverse polarityOvertemperatureOvervoltage |
| Architecture standard | QMC VITA 93 |
|---|---|
| Board function | Digital I/O |
| Bus interface | PCIe Revision 2.1 x1 |
| Dimensions | 26 mm x 78.25 mm |
|---|
| Operating temperature | -40–85 °C |
|---|---|
| Storage temperature | -40–85 °C |
Data extracted from the manufacturers' technical sheets: the official product spec sheet remains the reference for final confirmation.
Family configurations
The order codes of this family: the sheet applies to all of them, the detail of each configuration is in the datasheet.
| Configuration (PN) |
|---|
| TQMC603-10R-A |
| TQMC603-10R-H |
Documentation

Let's talk about your project
Phone and email go straight to our technical sales team in Turin: the first answer is already a technical one.





